The fireproof board is a kind of veneered laminated board, so its thickness control is relatively flexible. The thickness of the fireproof board commonly used in the market is between 0.6mm-1.5mm, which can be customized according to the actual demand. There are no too many restrictions on the manufacturer. When the thickness exceeds 1.6mm to 25mm, this part is called anti Beite board, The material is basically the same as the fireproof board, but the name is different.

正規防火板厚度在0.6-1.2毫米左右，貼面在0.6-1毫米左右就足夠了。在選擇防火板時，注意厚度是否達到標準，薄厚度是否均勻，優良防火板的薄厚度基本都是一樣的，不會存在差距的。可以通過測量來判斷薄厚度，然后決定它的好壞。

The thickness of regular fireproof board is about 0.6-1.2mm, and the veneer is about 0.6-1mm. When selecting fireproof board, pay attention to whether the thickness meets the standard and whether the thin thickness is uniform. The thin thickness of excellent fireproof board is basically the same, and there will be no gap. The thin thickness can be judged by measurement, and then its quality can be determined.

關于防火板的相關知識小編就先給大家介紹到這里，相信經過小編的介紹，現在大家也應該都對防火板有所了解了，如果想要了解更多知識歡迎聯系我們:http://k3037.cn

I'll introduce you to the relevant knowledge of fireproof board here first. I believe that after the introduction of Xiaobian, you should all know about fireproof board now. If you want to know more, please contact us: http://k3037.cn